Star wand with ribbons SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A plump five-pointed star on a stick, with a smaller star cut out of its middle and two ribbons that wave down from under it. Leaned to one side, as a wand is held. For birthday crowns, party bags and dressing-up boxes.
What is in the file
| Size | 66 × 100 mm (2.59 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 567 mm at this size |
| Narrowest part | 3.5 mm at this size |
| Nodes | 124 curve and line segments |
Measured from the file. PNG: 1,340 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.66 × 1 in (17 × 25 mm) | 0.89 mm | 144 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 1.31 × 2 in (33 × 51 mm) | 1.8 mm | 288 mm | 40 | Vinyl, card and thin sheet |
| 1.97 × 3 in (50 × 76 mm) | 2.7 mm | 432 mm | 15 | Vinyl, card and thin sheet |
| 2.63 × 4 in (67 × 102 mm) | 3.6 mm | 576 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.94 × 6 in (100 × 152 mm) | 5.3 mm | 864 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.26 × 8 in (134 × 203 mm) | 7.1 mm | 1,152 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.88 × 12 in (200 × 305 mm) | 11 mm | 1,728 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wand SVG files
-
Magic wand with sparkles Solid · 6 pieces -
Wizard wand with a curl of magic Solid · one piece -
Princess wand with a heart Solid · one piece -
Flower wand with two leaves Solid · one piece -
Moon wand with a hanging star Solid · one piece -
Princess crown and wand Solid · one piece -
Wand with a trail of stars Solid · one piece -
Magic wands, set of three Solid · one piece
← Layered star wand in four colours All 14 wands Magic wand with sparkles →