Wizard wand with a curl of magic SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A wand of carved wood: a handle with a pommel and two rings, a shaft that wavers and thins to its tip, and a spiral of magic unwinding from the tip to a small star. One piece, and nobody’s wand but yours.
What is in the file
| Size | 79 × 100 mm (3.09 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 522 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 214 curve and line segments |
Measured from the file. PNG: 1,588 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.79 × 1 in (20 × 25 mm) | 0.56 mm | 133 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 1.57 × 2 in (40 × 51 mm) | 1.1 mm | 265 mm | 30 | Vinyl, card and thin sheet |
| 2.36 × 3 in (60 × 76 mm) | 1.7 mm | 398 mm | 12 | Vinyl, card and thin sheet |
| 3.14 × 4 in (80 × 102 mm) | 2.2 mm | 530 mm | 6 | Vinyl, card and thin sheet |
| 4.72 × 6 in (120 × 152 mm) | 3.4 mm | 796 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.29 × 8 in (160 × 203 mm) | 4.5 mm | 1,061 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.43 × 12 in (240 × 305 mm) | 6.7 mm | 1,591 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wand SVG files
-
Princess wand with a heart Solid · one piece -
Flower wand with two leaves Solid · one piece -
Moon wand with a hanging star Solid · one piece -
Princess crown and wand Solid · one piece -
Wand with a trail of stars Solid · one piece -
Magic wands, set of three Solid · one piece -
Magic hat and wand Solid · one piece -
Star wand silhouette Solid · one piece
← Magic wand with sparkles All 14 wands Princess wand with a heart →