Magic hat and wand SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A conjuror’s top hat with a banded crown and three sparkles cut into it, and a wand slanting out from behind it, welded to it, with a large sparkle at its tip. For magic show posters and party invitations.
What is in the file
| Size | 100 × 71 mm (3.94 × 2.79 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 569 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 65 curve and line segments |
Measured from the file. PNG: 2,000 × 1,440 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.71 in (25 × 18 mm) | 0.43 mm | 145 mm | 130 | Too fine for most machines |
| 2 × 1.42 in (51 × 36 mm) | 0.86 mm | 289 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.13 in (76 × 54 mm) | 1.3 mm | 434 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.84 in (102 × 72 mm) | 1.7 mm | 578 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.25 in (152 × 108 mm) | 2.6 mm | 867 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.67 in (203 × 144 mm) | 3.5 mm | 1,156 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.51 in (305 × 216 mm) | 5.2 mm | 1,734 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wand SVG files
-
Star wand silhouette Solid · one piece -
Star wand outline Outline · one piece -
Wand with a starburst name ring Solid · one piece -
Layered star wand in four colours Layered · 4 pieces -
Star wand with ribbons Solid · one piece -
Magic wand with sparkles Solid · 6 pieces -
Wizard wand with a curl of magic Solid · one piece -
Princess wand with a heart Solid · one piece
← Magic wands, set of three All 14 wands Star wand silhouette →