Star wand outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The star drawn as an even line with an open middle, on a solid stick, leaning the other way. For colouring pages, foil and pen plotters, or for writing a wish inside the star.
What is in the file
| Size | 66 × 100 mm (2.59 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 468 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 54 curve and line segments |
Measured from the file. PNG: 1,340 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.66 × 1 in (17 × 25 mm) | 0.69 mm | 119 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 1.31 × 2 in (33 × 51 mm) | 1.4 mm | 238 mm | 40 | Vinyl, card and thin sheet |
| 1.97 × 3 in (50 × 76 mm) | 2.1 mm | 357 mm | 15 | Vinyl, card and thin sheet |
| 2.63 × 4 in (67 × 102 mm) | 2.7 mm | 475 mm | 8 | Vinyl, card and thin sheet |
| 3.94 × 6 in (100 × 152 mm) | 4.1 mm | 713 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.26 × 8 in (134 × 203 mm) | 5.5 mm | 951 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.88 × 12 in (200 × 305 mm) | 8.2 mm | 1,426 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wand SVG files
-
Wand with a starburst name ring Solid · one piece -
Layered star wand in four colours Layered · 4 pieces -
Star wand with ribbons Solid · one piece -
Magic wand with sparkles Solid · 6 pieces -
Wizard wand with a curl of magic Solid · one piece -
Princess wand with a heart Solid · one piece -
Flower wand with two leaves Solid · one piece -
Moon wand with a hanging star Solid · one piece
← Star wand silhouette All 14 wands Wand with a starburst name ring →