Princess wand with a heart SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A heart with a smaller heart cut from its middle, on a stick tied with a bow and two trailing ribbons. For princess parties, flower girl gifts and bedroom door signs.
What is in the file
| Size | 71 × 100 mm (2.78 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 579 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 130 curve and line segments |
Measured from the file. PNG: 1,435 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.71 × 1 in (18 × 25 mm) | 0.43 mm | 147 mm | 130 | Too fine for most machines |
| 1.41 × 2 in (36 × 51 mm) | 0.86 mm | 294 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 2.12 × 3 in (54 × 76 mm) | 1.3 mm | 441 mm | 15 | Vinyl, card and thin sheet |
| 2.82 × 4 in (72 × 102 mm) | 1.7 mm | 588 mm | 8 | Vinyl, card and thin sheet |
| 4.24 × 6 in (108 × 152 mm) | 2.6 mm | 882 mm | 2 | Vinyl, card and thin sheet |
| 5.65 × 8 in (143 × 203 mm) | 3.5 mm | 1,177 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.47 × 12 in (215 × 305 mm) | 5.2 mm | 1,765 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wand SVG files
-
Flower wand with two leaves Solid · one piece -
Moon wand with a hanging star Solid · one piece -
Princess crown and wand Solid · one piece -
Wand with a trail of stars Solid · one piece -
Magic wands, set of three Solid · one piece -
Magic hat and wand Solid · one piece -
Star wand silhouette Solid · one piece -
Star wand outline Outline · one piece
← Wizard wand with a curl of magic All 14 wands Flower wand with two leaves →