Free wand SVG

Moon wand with a hanging star SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Moon wand with a hanging star. The preview is the SVG file itself.

A crescent moon on a stick with a small star hanging on a thread inside its curve and two short ribbons underneath. For bedtime story corners, nursery walls and night sky party themes.

What is in the file

Size	51 × 100 mm (2.01 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	511 mm at this size
Narrowest part	2.6 mm at this size
Nodes	107 curve and line segments

Measured from the file. PNG: 1,058 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.51 × 1 in (13 × 25 mm)	0.66 mm	130 mm	170	Fine detail: vinyl and paper only, weed with care
1.02 × 2 in (26 × 51 mm)	1.3 mm	260 mm	50	Vinyl, card and thin sheet
1.53 × 3 in (39 × 76 mm)	2 mm	389 mm	21	Vinyl, card and thin sheet
2.04 × 4 in (52 × 102 mm)	2.6 mm	519 mm	10	Vinyl, card and thin sheet
3.06 × 6 in (78 × 152 mm)	4 mm	779 mm	3	Any material, including 3 mm wood and acrylic
4.08 × 8 in (104 × 203 mm)	5.3 mm	1,038 mm	2	Any material, including 3 mm wood and acrylic
6.12 × 12 in (155 × 305 mm)	7.9 mm	1,558 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More wand SVG files

← Flower wand with two leaves All 14 wands Princess crown and wand →