Magic wands, set of three SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Three wands fanned out from one point and tied with a bow where they cross: a star in the middle, a heart on the left and a crescent moon on the right. One piece, for a party invitation or a costume shop sign.
What is in the file
| Size | 100 × 93 mm (3.94 × 3.66 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 691 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 122 curve and line segments |
Measured from the file. PNG: 2,000 × 1,865 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.93 in (25 × 24 mm) | 0.69 mm | 176 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.86 in (51 × 47 mm) | 1.4 mm | 351 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.79 in (76 × 71 mm) | 2.1 mm | 527 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.72 in (102 × 94 mm) | 2.7 mm | 702 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.58 in (152 × 142 mm) | 4.1 mm | 1,053 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.44 in (203 × 189 mm) | 5.5 mm | 1,404 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.16 in (305 × 283 mm) | 8.2 mm | 2,106 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wand SVG files
-
Magic hat and wand Solid · one piece -
Star wand silhouette Solid · one piece -
Star wand outline Outline · one piece -
Wand with a starburst name ring Solid · one piece -
Layered star wand in four colours Layered · 4 pieces -
Star wand with ribbons Solid · one piece -
Magic wand with sparkles Solid · 6 pieces -
Wizard wand with a curl of magic Solid · one piece
← Wand with a trail of stars All 14 wands Magic hat and wand →