Magic wand with sparkles SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The conjuror’s wand: a straight black stick with a pale tip marked off at each end, held at a slant, with three sparkles and two dots bursting from its top. The sparkles are loose pieces by design.
What is in the file
| Size | 90 × 100 mm (3.54 × 3.94 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 8: 6 outer edges and 2 cut-outs |
| Cut length | 466 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 60 curve and line segments |
Measured from the file. PNG: 1,806 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.9 × 1 in (23 × 25 mm) | 0.53 mm | 118 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.8 × 2 in (46 × 51 mm) | 1.1 mm | 237 mm | 30 | Vinyl, card and thin sheet |
| 2.7 × 3 in (69 × 76 mm) | 1.6 mm | 355 mm | 12 | Vinyl, card and thin sheet |
| 3.6 × 4 in (91 × 102 mm) | 2.1 mm | 473 mm | 6 | Vinyl, card and thin sheet |
| 5.39 × 6 in (137 × 152 mm) | 3.2 mm | 710 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.19 × 8 in (183 × 203 mm) | 4.3 mm | 947 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.79 × 12 in (274 × 305 mm) | 6.4 mm | 1,420 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wand SVG files
-
Wizard wand with a curl of magic Solid · one piece -
Princess wand with a heart Solid · one piece -
Flower wand with two leaves Solid · one piece -
Moon wand with a hanging star Solid · one piece -
Princess crown and wand Solid · one piece -
Wand with a trail of stars Solid · one piece -
Magic wands, set of three Solid · one piece -
Magic hat and wand Solid · one piece
← Star wand with ribbons All 14 wands Wizard wand with a curl of magic →