Trick or Treat stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “TRICK OR TREAT” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 70 mm (3.94 × 2.74 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 13: 1 outer edge and 12 cut-outs |
| Cut length | 1,325 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 280 curve and line segments |
Measured from the file. PNG: 2,000 × 1,417 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.7 in (25 × 18 mm) | 0.28 mm | 337 mm | 130 | Too fine for most machines |
| 2 × 1.39 in (51 × 35 mm) | 0.56 mm | 673 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.09 in (76 × 53 mm) | 0.84 mm | 1,010 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.79 in (102 × 71 mm) | 1.1 mm | 1,346 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.18 in (152 × 106 mm) | 1.7 mm | 2,019 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.58 in (203 × 142 mm) | 2.2 mm | 2,692 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8.36 in (305 × 212 mm) | 3.4 mm | 4,039 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Trick or Treat SVG files
-
Trick or Treat with a drop shadow Layered · 11 pieces
-
Trick or Treat with a jack-o’-lantern Solid · 11 pieces
-
Trick or Treat in Pacifico Solid · 6 pieces
-
Trick or Treat in Lobster Solid · 8 pieces
-
Trick or Treat in Kaushan Script Solid · 13 pieces
-
Trick or Treat in Lilita One Solid · 13 pieces
-
Trick or Treat in Alfa Slab One Solid · 13 pieces
-
Trick or Treat in Amatic SC Solid · 12 pieces
← Trick or Treat outline lettering All 14 Trick or Treat designs Trick or Treat with a drop shadow →