Trick or Treat in Kaushan Script SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Trick or Treat” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.
What is in the file
| Size | 100 × 65 mm (3.94 × 2.54 in), scales to any size |
|---|---|
| Pieces | 13 separate pieces |
| Outlines to cut | 15: 13 outer edges and 2 cut-outs |
| Cut length | 903 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 360 curve and line segments |
Measured from the file. PNG: 2,000 × 1,319 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.65 in (25 × 16 mm) | 0.25 mm | 229 mm | 140 | Too fine for most machines |
| 2 × 1.29 in (51 × 33 mm) | 0.51 mm | 459 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.94 in (76 × 49 mm) | 0.76 mm | 688 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.58 in (102 × 66 mm) | 1 mm | 917 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.88 in (152 × 98 mm) | 1.5 mm | 1,376 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.17 in (203 × 131 mm) | 2 mm | 1,835 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.75 in (305 × 197 mm) | 3 mm | 2,752 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Trick or Treat SVG files
-
Trick or Treat in Lilita One Solid · 13 pieces
-
Trick or Treat in Alfa Slab One Solid · 13 pieces
-
Trick or Treat in Amatic SC Solid · 12 pieces
-
Trick or Treat in block capitals Solid · 12 pieces
-
Trick or Treat in script and capitals Solid · 10 pieces
-
Trick or Treat in Creepster Solid · 12 pieces
-
Trick or Treat with stars Solid · 14 pieces
-
Trick or Treat outline lettering Outline · 14 pieces
← Trick or Treat in Lobster All 14 Trick or Treat designs Trick or Treat in Lilita One →