Free Trick or Treat SVG

Trick or Treat in Alfa Slab One SVG

Trick or Treat in Alfa Slab One, as a solid black shape — Trick or Treat in Alfa Slab One. The preview is the SVG file itself.

“Trick or Treat” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 45 mm (3.94 × 1.79 in), scales to any size
Pieces	13 separate pieces
Outlines to cut	16: 13 outer edges and 3 cut-outs
Cut length	772 mm at this size
Narrowest part	2.3 mm at this size
Nodes	383 curve and line segments

Measured from the file. PNG: 2,000 × 950 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.45 in (25 × 12 mm)	0.58 mm	196 mm	180	Fine detail: vinyl and paper only, weed with care
2 × 0.91 in (51 × 23 mm)	1.2 mm	392 mm	55	Vinyl, card and thin sheet
3 × 1.36 in (76 × 35 mm)	1.8 mm	588 mm	21	Vinyl, card and thin sheet
4 × 1.82 in (102 × 46 mm)	2.3 mm	784 mm	12	Vinyl, card and thin sheet
6 × 2.72 in (152 × 69 mm)	3.5 mm	1,177 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.63 in (203 × 92 mm)	4.7 mm	1,569 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.45 in (305 × 138 mm)	7 mm	2,353 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Trick or Treat SVG files

← Trick or Treat in Lilita One All 13 Trick or Treat designs Trick or Treat in Amatic SC →