Trick or Treat in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Trick or Treat” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 100 × 91 mm (3.94 × 3.58 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 17: 12 outer edges and 5 cut-outs |
| Cut length | 1,394 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 425 curve and line segments |
Measured from the file. PNG: 2,000 × 1,825 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.91 in (25 × 23 mm) | 0.51 mm | 354 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.82 in (51 × 46 mm) | 1 mm | 708 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.73 in (76 × 69 mm) | 1.5 mm | 1,062 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.64 in (102 × 92 mm) | 2 mm | 1,416 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.45 in (152 × 139 mm) | 3 mm | 2,124 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.27 in (203 × 185 mm) | 4.1 mm | 2,833 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.91 in (305 × 277 mm) | 6.1 mm | 4,249 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Trick or Treat SVG files
-
Trick or Treat in block capitals Solid · 12 pieces
-
Trick or Treat in script and capitals Solid · 10 pieces
-
Trick or Treat in Creepster Solid · 12 pieces
-
Trick or Treat with stars Solid · 14 pieces
-
Trick or Treat outline lettering Outline · 14 pieces
-
Trick or Treat stencil plate Solid · one piece
-
Trick or Treat with a drop shadow Layered · 11 pieces
-
Trick or Treat with a jack-o’-lantern Solid · 11 pieces
← Trick or Treat in Alfa Slab One All 14 Trick or Treat designs Trick or Treat in block capitals →