Free Trick or Treat SVG

Trick or Treat outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Trick or Treat outline lettering, drawn as a line
Trick or Treat outline lettering. The preview is the SVG file itself.

“Trick or Treat” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 51 mm (3.94 × 2.01 in), scales to any size
Pieces14 separate pieces
Outlines to cut32: 14 outer edges and 18 cut-outs
Cut length1,250 mm at this size
Narrowest part0.9 mm at this size
Nodes390 curve and line segments

Measured from the file. PNG: 2,000 × 1,060 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.51 in (25 × 13 mm)0.23 mm318 mm170Too fine for most machines
2 × 1.02 in (51 × 26 mm)0.46 mm635 mm45Too fine for most machines
3 × 1.53 in (76 × 39 mm)0.69 mm952 mm21Fine detail: vinyl and paper only, weed with care
4 × 2.04 in (102 × 52 mm)0.91 mm1,270 mm10Fine detail: vinyl and paper only, weed with care
6 × 3.07 in (152 × 78 mm)1.4 mm1,905 mm3Vinyl, card and thin sheet
8 × 4.09 in (203 × 104 mm)1.8 mm2,540 mm2Vinyl, card and thin sheet
12 × 6.13 in (305 × 156 mm)2.7 mm3,810 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Trick or Treat SVG files

← Trick or Treat with stars All 14 Trick or Treat designs Trick or Treat stencil plate →