Free Trick or Treat SVG

Trick or Treat in Lobster SVG

Trick or Treat in Lobster, as a solid black shape — Trick or Treat in Lobster. The preview is the SVG file itself.

“Trick or Treat” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 70 mm (3.94 × 2.75 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	11: 8 outer edges and 3 cut-outs
Cut length	927 mm at this size
Narrowest part	1.3 mm at this size
Nodes	334 curve and line segments

Measured from the file. PNG: 2,000 × 1,419 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.7 in (25 × 18 mm)	0.33 mm	235 mm	130	Too fine for most machines
2 × 1.4 in (51 × 35 mm)	0.66 mm	471 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.09 in (76 × 53 mm)	0.99 mm	706 mm	15	Fine detail: vinyl and paper only, weed with care
4 × 2.79 in (102 × 71 mm)	1.3 mm	942 mm	8	Vinyl, card and thin sheet
6 × 4.19 in (152 × 106 mm)	2 mm	1,413 mm	2	Vinyl, card and thin sheet
8 × 5.58 in (203 × 142 mm)	2.6 mm	1,884 mm	2	Vinyl, card and thin sheet
12 × 8.38 in (305 × 213 mm)	4 mm	2,825 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Trick or Treat SVG files

← Trick or Treat in Pacifico All 13 Trick or Treat designs Trick or Treat in Kaushan Script →