Trick or Treat in block capitals SVG
“TRICK OR TREAT” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 74 mm (3.94 × 2.9 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 17: 12 outer edges and 5 cut-outs |
| Cut length | 1,437 mm at this size |
| Narrowest part | 3.3 mm at this size |
| Nodes | 182 curve and line segments |
Measured from the file. PNG: 2,000 × 1,492 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.74 in (25 × 19 mm) | 0.84 mm | 365 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.47 in (51 × 37 mm) | 1.7 mm | 730 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.21 in (76 × 56 mm) | 2.5 mm | 1,095 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.94 in (102 × 75 mm) | 3.4 mm | 1,460 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.42 in (152 × 112 mm) | 5 mm | 2,190 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.89 in (203 × 150 mm) | 6.7 mm | 2,920 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.83 in (305 × 224 mm) | 10 mm | 4,380 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Trick or Treat SVG files
-
Trick or Treat in script and capitals Solid · 10 pieces -
Trick or Treat in Creepster Solid · 12 pieces -
Trick or Treat with stars Solid · 14 pieces -
Trick or Treat outline lettering Outline · 14 pieces -
Trick or Treat stencil plate Solid · one piece -
Trick or Treat with a drop shadow Layered · 11 pieces -
Trick or Treat in Pacifico Solid · 6 pieces -
Trick or Treat in Lobster Solid · 8 pieces
← Trick or Treat in Amatic SC All 13 Trick or Treat designs Trick or Treat in script and capitals →