Free Trick or Treat SVG

Trick or Treat with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Trick or Treat with stars, as a solid black shape
Trick or Treat with stars. The preview is the SVG file itself.

“Trick or Treat” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size98 × 100 mm (3.86 × 3.94 in), scales to any size
Pieces14 separate pieces
Outlines to cut17: 14 outer edges and 3 cut-outs
Cut length1,143 mm at this size
Narrowest part1.2 mm at this size
Nodes280 curve and line segments

Measured from the file. PNG: 1,962 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.98 × 1 in (25 × 25 mm)0.3 mm290 mm100Too fine for most machines
1.96 × 2 in (50 × 51 mm)0.61 mm581 mm25Fine detail: vinyl and paper only, weed with care
2.94 × 3 in (75 × 76 mm)0.91 mm871 mm9Fine detail: vinyl and paper only, weed with care
3.92 × 4 in (100 × 102 mm)1.2 mm1,161 mm4Vinyl, card and thin sheet
5.88 × 6 in (149 × 152 mm)1.8 mm1,742 mm2Vinyl, card and thin sheet
7.84 × 8 in (199 × 203 mm)2.4 mm2,323 mm1Vinyl, card and thin sheet
11.76 × 12 in (299 × 305 mm)3.7 mm3,484 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Trick or Treat SVG files

← Trick or Treat in Creepster All 14 Trick or Treat designs Trick or Treat outline lettering →