Trick or Treat in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Trick or Treat” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 54 mm (3.94 × 2.14 in), scales to any size |
|---|---|
| Pieces | 13 separate pieces |
| Outlines to cut | 16: 13 outer edges and 3 cut-outs |
| Cut length | 758 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 229 curve and line segments |
Measured from the file. PNG: 2,000 × 1,123 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.54 in (25 × 14 mm) | 0.79 mm | 193 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.09 in (51 × 28 mm) | 1.6 mm | 385 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.63 in (76 × 41 mm) | 2.4 mm | 578 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.18 in (102 × 55 mm) | 3.1 mm | 770 mm | 10 | Any material, including 3 mm wood and acrylic |
| 6 × 3.26 in (152 × 83 mm) | 4.7 mm | 1,155 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.35 in (203 × 111 mm) | 6.3 mm | 1,540 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.53 in (305 × 166 mm) | 9.4 mm | 2,310 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Trick or Treat SVG files
-
Trick or Treat in Alfa Slab One Solid · 13 pieces
-
Trick or Treat in Amatic SC Solid · 12 pieces
-
Trick or Treat in block capitals Solid · 12 pieces
-
Trick or Treat in script and capitals Solid · 10 pieces
-
Trick or Treat in Creepster Solid · 12 pieces
-
Trick or Treat with stars Solid · 14 pieces
-
Trick or Treat outline lettering Outline · 14 pieces
-
Trick or Treat stencil plate Solid · one piece
← Trick or Treat in Kaushan Script All 14 Trick or Treat designs Trick or Treat in Alfa Slab One →