Free Trick or Treat SVG

Trick or Treat in Creepster SVG

Trick or Treat in Creepster, as a solid black shape — Trick or Treat in Creepster. The preview is the SVG file itself.

“TRICK OR TREAT” in Creepster, a dripping horror face, for when the lettering should carry the mood by itself. Each letter is a separate piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 59 mm (3.94 × 2.33 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	17: 12 outer edges and 5 cut-outs
Cut length	971 mm at this size
Narrowest part	3.2 mm at this size
Nodes	732 curve and line segments

Measured from the file. PNG: 2,000 × 1,213 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.59 in (25 × 15 mm)	0.81 mm	247 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.18 in (51 × 30 mm)	1.6 mm	493 mm	40	Vinyl, card and thin sheet
3 × 1.77 in (76 × 45 mm)	2.4 mm	740 mm	18	Vinyl, card and thin sheet
4 × 2.36 in (102 × 60 mm)	3.3 mm	987 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.55 in (152 × 90 mm)	4.9 mm	1,480 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.73 in (203 × 120 mm)	6.5 mm	1,973 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.09 in (305 × 180 mm)	9.8 mm	2,960 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Trick or Treat SVG files

← Trick or Treat in script and capitals All 13 Trick or Treat designs Trick or Treat with stars →