Free Trick or Treat SVG

Trick or Treat in Pacifico SVG

Trick or Treat in Pacifico, as a solid black shape — Trick or Treat in Pacifico. The preview is the SVG file itself.

“Trick or Treat” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 72 mm (3.94 × 2.82 in), scales to any size
Pieces	6 separate pieces
Outlines to cut	11: 6 outer edges and 5 cut-outs
Cut length	892 mm at this size
Narrowest part	2 mm at this size
Nodes	388 curve and line segments

Measured from the file. PNG: 2,000 × 1,456 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.72 in (25 × 18 mm)	0.51 mm	227 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.43 in (51 × 36 mm)	1 mm	453 mm	35	Vinyl, card and thin sheet
3 × 2.15 in (76 × 55 mm)	1.5 mm	680 mm	15	Vinyl, card and thin sheet
4 × 2.87 in (102 × 73 mm)	2 mm	906 mm	6	Vinyl, card and thin sheet
6 × 4.3 in (152 × 109 mm)	3 mm	1,359 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.74 in (203 × 146 mm)	4.1 mm	1,813 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.6 in (305 × 219 mm)	6.1 mm	2,719 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Trick or Treat SVG files

← Trick or Treat with a drop shadow All 13 Trick or Treat designs Trick or Treat in Lobster →