Trick or Treat with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Trick or Treat” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 73 mm (3.94 × 2.86 in), scales to any size |
|---|---|
| Pieces | 11 separate pieces |
| Outlines to cut | 21: 11 outer edges and 10 cut-outs |
| Cut length | 1,546 mm at this size |
| Narrowest part | 4.2 mm at this size |
| Nodes | 479 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,473 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.73 in (25 × 18 mm) | 1.1 mm | 393 mm | 130 | Vinyl, card and thin sheet |
| 2 × 1.45 in (51 × 37 mm) | 2.1 mm | 785 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.18 in (76 × 55 mm) | 3.2 mm | 1,178 mm | 15 | Any material, including 3 mm wood and acrylic |
| 4 × 2.9 in (102 × 74 mm) | 4.3 mm | 1,571 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.36 in (152 × 111 mm) | 6.4 mm | 2,356 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.81 in (203 × 148 mm) | 8.5 mm | 3,141 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.71 in (305 × 221 mm) | 13 mm | 4,712 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Trick or Treat SVG files
-
Trick or Treat with a jack-o’-lantern Solid · 11 pieces
-
Trick or Treat in Pacifico Solid · 6 pieces
-
Trick or Treat in Lobster Solid · 8 pieces
-
Trick or Treat in Kaushan Script Solid · 13 pieces
-
Trick or Treat in Lilita One Solid · 13 pieces
-
Trick or Treat in Alfa Slab One Solid · 13 pieces
-
Trick or Treat in Amatic SC Solid · 12 pieces
-
Trick or Treat in block capitals Solid · 12 pieces
← Trick or Treat stencil plate All 14 Trick or Treat designs Trick or Treat with a jack-o’-lantern →