Tiger stripes SVG
A swatch of tiger stripes as loose pieces: long stripes reaching in from the top and the bottom by turns, some forked, with short dashes between. Lay them over a shirt, a letter or a tumbler.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 72 mm (3.94 × 2.83 in), scales to any size |
|---|---|
| Pieces | 17 separate pieces |
| Outlines to cut | 17 outlines |
| Cut length | 1,197 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 512 curve and line segments |
Measured from the file. PNG: 2,000 × 1,462 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.72 in (25 × 18 mm) | 0.48 mm | 304 mm | 130 | Too fine for most machines |
| 2 × 1.44 in (51 × 37 mm) | 0.97 mm | 608 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.16 in (76 × 55 mm) | 1.4 mm | 912 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.88 in (102 × 73 mm) | 1.9 mm | 1,216 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.32 in (152 × 110 mm) | 2.9 mm | 1,824 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.76 in (203 × 146 mm) | 3.9 mm | 2,432 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.64 in (305 × 219 mm) | 5.8 mm | 3,648 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Tiger print stencil 
Tiger stripe heart 
Tiger claw marks 
Walking tiger with stripes 
Tiger silhouette 
Roaring tiger 
Sitting tiger 
Tiger lying down 