Tiger outline SVG
The walking tiger as one even line with its stripes drawn solid, each one joined to the outline. For colouring pages, foil, engraving and pen plotters.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.35 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 1,102 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 559 curve and line segments |
Measured from the file. PNG: 2,000 × 1,223 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.48 mm | 280 mm | 150 | Too fine for most machines |
| 2 × 1.19 in (51 × 30 mm) | 0.97 mm | 560 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.79 in (76 × 45 mm) | 1.4 mm | 840 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.38 in (102 × 61 mm) | 1.9 mm | 1,120 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.58 in (152 × 91 mm) | 2.9 mm | 1,679 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.77 in (203 × 121 mm) | 3.9 mm | 2,239 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.15 in (305 × 182 mm) | 5.8 mm | 3,359 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Tiger stripes 
Tiger print stencil 
Tiger stripe heart 
Tiger claw marks 
Walking tiger with stripes 
Tiger silhouette 
Roaring tiger 
Sitting tiger 