Tiger print stencil SVG
A panel with tiger stripes cut through it, held together by a solid border. Use it as a stencil for paint or bleach, or cut it from vinyl as a patch of tiger print.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 75 mm (3.94 × 2.95 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 13: 1 outer edge and 12 cut-outs |
| Cut length | 1,556 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 553 curve and line segments |
Measured from the file. PNG: 2,000 × 1,519 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.75 in (25 × 19 mm) | 0.58 mm | 395 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.5 in (51 × 38 mm) | 1.2 mm | 790 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.25 in (76 × 57 mm) | 1.8 mm | 1,186 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3 in (102 × 76 mm) | 2.3 mm | 1,581 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.5 in (152 × 114 mm) | 3.5 mm | 2,371 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6 in (203 × 152 mm) | 4.7 mm | 3,162 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9 in (305 × 229 mm) | 7 mm | 4,743 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Tiger stripe heart 
Tiger claw marks 
Walking tiger with stripes 
Tiger silhouette 
Roaring tiger 
Sitting tiger 
Tiger lying down 
Tiger cub 