Sitting tiger SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A tiger sitting upright in profile with its banded tail curled up behind it and stripes down its back and chest. Tall rather than wide, for bookmarks and tumblers.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 79 mm (3.94 × 3.13 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 16: 1 outer edge and 15 cut-outs |
| Cut length | 641 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 346 curve and line segments |
Measured from the file. PNG: 2,000 × 1,604 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.79 in (25 × 20 mm) | 0.51 mm | 163 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.59 in (51 × 40 mm) | 1 mm | 326 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.38 in (76 × 61 mm) | 1.5 mm | 488 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.18 in (102 × 81 mm) | 2 mm | 651 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.76 in (152 × 121 mm) | 3 mm | 977 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.35 in (203 × 161 mm) | 4.1 mm | 1,303 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.53 in (305 × 242 mm) | 6.1 mm | 1,954 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.