Tiger cub SVG
A cub in profile with a big head, round ears, heavy paws, a few bold stripes and a short banded tail in the air. For nursery walls and birthday cards.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 79 mm (3.94 × 3.11 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 14: 1 outer edge and 13 cut-outs |
| Cut length | 781 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 395 curve and line segments |
Measured from the file. PNG: 2,000 × 1,598 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.79 in (25 × 20 mm) | 0.86 mm | 198 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.58 in (51 × 40 mm) | 1.7 mm | 397 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.37 in (76 × 60 mm) | 2.6 mm | 595 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.16 in (102 × 80 mm) | 3.5 mm | 793 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.75 in (152 × 121 mm) | 5.2 mm | 1,190 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.33 in (203 × 161 mm) | 6.9 mm | 1,587 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.49 in (305 × 241 mm) | 10 mm | 2,380 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Baby tiger sitting 
Tiger head with stripes 
Cute tiger face 
Tiger outline 
Tiger stripes 
Tiger print stencil 
Tiger stripe heart 
Tiger claw marks 