Tiger lying down SVG
A tiger at rest with its head up, front legs stretched out and tail curled up behind. Long and low, for the foot of a sign or along a shelf.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 54 mm (3.94 × 2.11 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 18: 1 outer edge and 17 cut-outs |
| Cut length | 681 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 398 curve and line segments |
Measured from the file. PNG: 2,000 × 1,108 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.54 in (25 × 14 mm) | 0.58 mm | 173 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.07 in (51 × 27 mm) | 1.2 mm | 346 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.61 in (76 × 41 mm) | 1.8 mm | 519 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.14 in (102 × 54 mm) | 2.3 mm | 692 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.22 in (152 × 82 mm) | 3.5 mm | 1,038 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.29 in (203 × 109 mm) | 4.7 mm | 1,384 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.43 in (305 × 163 mm) | 7 mm | 2,076 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Tiger cub 
Baby tiger sitting 
Tiger head with stripes 
Cute tiger face 
Tiger outline 
Tiger stripes 
Tiger print stencil 
Tiger stripe heart 