Free tiger SVG

Tiger claw marks SVG

Tiger claw marks, as a solid black shape — Tiger claw marks. The preview is the SVG file itself.

Four slashes that swell and taper, as if raked by a paw. They are loose pieces: use them on shirts, car decals and party props.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	98 × 100 mm (3.84 × 3.94 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	4 outlines
Cut length	745 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	167 curve and line segments

Measured from the file. PNG: 1,952 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.98 × 1 in (25 × 25 mm)	Over 1.5 mm	189 mm	100	Vinyl, card and thin sheet
1.95 × 2 in (50 × 51 mm)	Over 3 mm	378 mm	25	Any material, including 3 mm wood and acrylic
2.93 × 3 in (74 × 76 mm)	Over 4.6 mm	568 mm	9	Any material, including 3 mm wood and acrylic
3.9 × 4 in (99 × 102 mm)	Over 6.1 mm	757 mm	4	Any material, including 3 mm wood and acrylic
5.85 × 6 in (149 × 152 mm)	Over 9.1 mm	1,135 mm	2	Any material, including 3 mm wood and acrylic
7.8 × 8 in (198 × 203 mm)	Over 12 mm	1,514 mm	1	Any material, including 3 mm wood and acrylic
11.7 × 12 in (297 × 305 mm)	Over 18 mm	2,271 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tiger SVG files

← Tiger stripe heart All 14 tigers Walking tiger with stripes →