Walking tiger with stripes SVG
A tiger in profile, mid stride, with stripes cut down from its back and up from its belly and a banded tail. The stripes stop short of the edge, so the outline stays clean.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.35 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 19: 1 outer edge and 18 cut-outs |
| Cut length | 781 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 465 curve and line segments |
Measured from the file. PNG: 2,000 × 1,223 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.53 mm | 198 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.19 in (51 × 30 mm) | 1.1 mm | 397 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.79 in (76 × 45 mm) | 1.6 mm | 595 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.38 in (102 × 61 mm) | 2.1 mm | 793 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.58 in (152 × 91 mm) | 3.2 mm | 1,190 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.77 in (203 × 121 mm) | 4.3 mm | 1,587 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.15 in (305 × 182 mm) | 6.4 mm | 2,380 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Tiger silhouette 
Roaring tiger 
Sitting tiger 
Tiger lying down 
Tiger cub 
Baby tiger sitting 
Tiger head with stripes 
Cute tiger face 