Roaring tiger SVG
A standing tiger with its head up and its jaws open, showing two fangs. Stripes on the head, body and legs, and a banded tail hanging behind.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.37 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 20: 1 outer edge and 19 cut-outs |
| Cut length | 806 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 477 curve and line segments |
Measured from the file. PNG: 2,000 × 1,235 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.58 mm | 205 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.2 in (51 × 31 mm) | 1.2 mm | 409 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.81 in (76 × 46 mm) | 1.8 mm | 614 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.41 in (102 × 61 mm) | 2.3 mm | 819 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.61 in (152 × 92 mm) | 3.5 mm | 1,228 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.82 in (203 × 122 mm) | 4.7 mm | 1,638 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.22 in (305 × 183 mm) | 7 mm | 2,457 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Sitting tiger 
Tiger lying down 
Tiger cub 
Baby tiger sitting 
Tiger head with stripes 
Cute tiger face 
Tiger outline 
Tiger stripes 