Tiger head with stripes SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A tiger head from the front: cheek ruffs, round ears, slanted eyes and eleven stripes across the forehead and cheeks. Exactly symmetrical.
What is in the file
| Size | 100 × 91 mm (3.94 × 3.57 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 19: 1 outer edge and 18 cut-outs |
| Cut length | 1,030 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 438 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,821 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.91 in (25 × 23 mm) | 0.61 mm | 262 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.81 in (51 × 46 mm) | 1.2 mm | 523 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.72 in (76 × 69 mm) | 1.8 mm | 785 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.63 in (102 × 92 mm) | 2.4 mm | 1,046 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.44 in (152 × 138 mm) | 3.7 mm | 1,570 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.26 in (203 × 184 mm) | 4.9 mm | 2,093 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.88 in (305 × 276 mm) | 7.3 mm | 3,139 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.