Tiger stripe heart SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A heart with tiger stripes cut through it from both sides, inside a solid border. For Valentine cards, a year of the tiger gift or a wild-at-heart shirt.
What is in the file
| Size | 100 × 89 mm (3.94 × 3.5 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 1,193 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 465 curve and line segments |
Measured from the file. PNG: 2,000 × 1,785 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.89 in (25 × 23 mm) | 0.25 mm | 303 mm | 110 | Too fine for most machines |
| 2 × 1.78 in (51 × 45 mm) | 0.51 mm | 606 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.66 in (76 × 68 mm) | 0.76 mm | 909 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.55 in (102 × 90 mm) | 1 mm | 1,212 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.33 in (152 × 135 mm) | 1.5 mm | 1,818 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.1 in (203 × 180 mm) | 2 mm | 2,424 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.66 in (305 × 271 mm) | 3 mm | 3,636 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.