Free tiger SVG

Cute tiger face SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cute tiger face, as a solid black shape
Cute tiger face. The preview is the SVG file itself.

A round tiger face with dot eyes, a smile and seven bold stripes. Thick everywhere, so it cuts well small, in felt and in craft foam.

What is in the file

Size100 × 92 mm (3.94 × 3.61 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length816 mm at this size
Narrowest part4.9 mm at this size
Nodes248 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,840 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.92 in (25 × 23 mm)1.2 mm207 mm100Vinyl, card and thin sheet
2 × 1.83 in (51 × 47 mm)2.5 mm415 mm30Vinyl, card and thin sheet
3 × 2.75 in (76 × 70 mm)3.7 mm622 mm12Any material, including 3 mm wood and acrylic
4 × 3.67 in (102 × 93 mm)5 mm829 mm6Any material, including 3 mm wood and acrylic
6 × 5.5 in (152 × 140 mm)7.5 mm1,244 mm2Any material, including 3 mm wood and acrylic
8 × 7.34 in (203 × 186 mm)10 mm1,658 mm1Any material, including 3 mm wood and acrylic
12 × 11 in (305 × 280 mm)15 mm2,487 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tiger SVG files

← Tiger claw marks All 14 tigers Walking tiger with stripes →