Free snowboard SVG

Crossed skis and poles for a snowboard lodge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Crossed skis and poles for a snowboard lodge, as a solid black shape
Crossed skis and poles for a snowboard lodge. The preview is the SVG file itself.

A pair of skis crossed over a pair of poles, the emblem of a ski lodge: each ski has a pointed tip, a toe piece and a heel piece, and the four cross at one point near the tails.

What is in the file

Size100 × 78 mm (3.94 × 3.06 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length730 mm at this size
Narrowest part2.3 mm at this size
Nodes135 curve and line segments

Measured from the file. PNG: 2,000 × 1,569 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.78 in (25 × 20 mm)0.58 mm185 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.55 in (51 × 39 mm)1.2 mm371 mm30Vinyl, card and thin sheet
3 × 2.33 in (76 × 59 mm)1.8 mm556 mm12Vinyl, card and thin sheet
4 × 3.1 in (102 × 79 mm)2.3 mm742 mm6Vinyl, card and thin sheet
6 × 4.66 in (152 × 118 mm)3.5 mm1,113 mm2Any material, including 3 mm wood and acrylic
8 × 6.21 in (203 × 158 mm)4.7 mm1,483 mm1Any material, including 3 mm wood and acrylic
12 × 9.31 in (305 × 237 mm)7 mm2,225 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowboard SVG files

← Two crossed snowboards All 15 snowboards Crossed ski poles for a snowboard lodge →