Free snowboard SVG

Snowboard outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Snowboard outline, drawn as a line
Snowboard outline. The preview is the SVG file itself.

The board from above as one joined line: the rim, two bindings drawn as boxes across the deck, a chevron and a centre line at each end. For colouring pages, foil and pen plotters.

What is in the file

Size26 × 100 mm (1.02 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length726 mm at this size
Narrowest part2.2 mm at this size
Nodes96 curve and line segments
SymmetryMirror

Measured from the file. PNG: 577 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.26 × 1 in (7 × 25 mm)0.56 mm184 mm260Fine detail: vinyl and paper only, weed with care
0.52 × 2 in (13 × 51 mm)1.1 mm369 mm80Vinyl, card and thin sheet
0.78 × 3 in (20 × 76 mm)1.7 mm553 mm36Vinyl, card and thin sheet
1.04 × 4 in (26 × 102 mm)2.2 mm738 mm18Vinyl, card and thin sheet
1.56 × 6 in (40 × 152 mm)3.4 mm1,106 mm6Any material, including 3 mm wood and acrylic
2.08 × 8 in (53 × 203 mm)4.5 mm1,475 mm5Any material, including 3 mm wood and acrylic
3.12 × 12 in (79 × 305 mm)6.7 mm2,213 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowboard SVG files

← Snowboard name sign All 15 snowboards Layered snowboard in four colours →