Skier on a snowboard slope SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A skier on a slope with knees bent and body forward, two skis with turned-up tips, a pole trailing behind and snow thrown up at the back. Two tracks are cut in the hill, which has a flat underside.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 72 mm (3.94 × 2.81 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 844 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 135 curve and line segments |
| Also found as | Skiing SVG |
Measured from the file. PNG: 2,000 × 1,452 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.72 in (25 × 18 mm) | 0.61 mm | 214 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.43 in (51 × 36 mm) | 1.2 mm | 429 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.14 in (76 × 54 mm) | 1.8 mm | 643 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.86 in (102 × 73 mm) | 2.4 mm | 858 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.29 in (152 × 109 mm) | 3.7 mm | 1,286 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.72 in (203 × 145 mm) | 4.9 mm | 1,715 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.58 in (305 × 218 mm) | 7.3 mm | 2,573 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More snowboard SVG files
-
Three snowboards standing in the snow Solid · one piece -
Snowboard planted in a snowdrift Solid · one piece -
Two crossed snowboards Solid · one piece -
Crossed skis and poles for a snowboard lodge Solid · one piece -
Crossed ski poles for a snowboard lodge Solid · one piece -
Snowboard goggles with a mountain view Solid · one piece -
Snowboarder in a mountain ring Solid · one piece -
Snowboard name sign Solid · one piece
← Snowboarder in the air holding the board All 15 snowboards Three snowboards standing in the snow →