Crossed ski poles for a snowboard lodge SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two ski poles crossed low down, each with a grip, a wrist strap, a tapering shaft and a round basket above the tip. Cut this one large: the shafts are the thinnest thing in the set.
What is in the file
| Size | 47 × 100 mm (1.83 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 514 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 66 curve and line segments |
| Also found as | Ski pole SVG |
Measured from the file. PNG: 971 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.47 × 1 in (12 × 25 mm) | 0.51 mm | 131 mm | 180 | Fine detail: vinyl and paper only, weed with care |
| 0.93 × 2 in (24 × 51 mm) | 1 mm | 261 mm | 50 | Vinyl, card and thin sheet |
| 1.39 × 3 in (35 × 76 mm) | 1.5 mm | 392 mm | 21 | Vinyl, card and thin sheet |
| 1.86 × 4 in (47 × 102 mm) | 2 mm | 522 mm | 10 | Vinyl, card and thin sheet |
| 2.79 × 6 in (71 × 152 mm) | 3 mm | 783 mm | 4 | Any material, including 3 mm wood and acrylic |
| 3.72 × 8 in (94 × 203 mm) | 4.1 mm | 1,044 mm | 3 | Any material, including 3 mm wood and acrylic |
| 5.58 × 12 in (142 × 305 mm) | 6.1 mm | 1,567 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More snowboard SVG files
-
Snowboard goggles with a mountain view Solid · one piece -
Snowboarder in a mountain ring Solid · one piece -
Snowboard name sign Solid · one piece -
Snowboard outline Outline · one piece -
Layered snowboard in four colours Layered · 14 pieces -
Snowboard from above Solid · one piece -
Snowboarder silhouette on a slope Solid · one piece -
Snowboarding rider with spray Solid · one piece
← Crossed skis and poles for a snowboard lodge All 15 snowboards Snowboard goggles with a mountain view →