Snowboarding rider with spray SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The rider alone, tipped to the angle of the slope, with goggles, a jacket zip and a belt line cut in and a plume of snow off the tail. For shirts, mugs and the back window of the car.
What is in the file
| Size | 100 × 70 mm (3.94 × 2.74 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 621 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 123 curve and line segments |
Measured from the file. PNG: 2,000 × 1,417 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.7 in (25 × 18 mm) | 0.43 mm | 158 mm | 130 | Too fine for most machines |
| 2 × 1.39 in (51 × 35 mm) | 0.86 mm | 315 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.09 in (76 × 53 mm) | 1.3 mm | 473 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.79 in (102 × 71 mm) | 1.7 mm | 631 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.18 in (152 × 106 mm) | 2.6 mm | 946 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.58 in (203 × 142 mm) | 3.5 mm | 1,262 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.36 in (305 × 212 mm) | 5.2 mm | 1,893 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More snowboard SVG files
-
Snowboarder in the air holding the board Solid · one piece -
Skier on a snowboard slope Solid · one piece -
Three snowboards standing in the snow Solid · one piece -
Snowboard planted in a snowdrift Solid · one piece -
Two crossed snowboards Solid · one piece -
Crossed skis and poles for a snowboard lodge Solid · one piece -
Crossed ski poles for a snowboard lodge Solid · one piece -
Snowboard goggles with a mountain view Solid · one piece
← Snowboarder silhouette on a slope All 15 snowboards Snowboarder in the air holding the board →