Snowboarder silhouette on a slope SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rider carving down a hillside as one plain shadow: knees bent, arms out for balance, snow flying off the tail of the board. The hill has a flat underside, so it stands in a shadow box.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 78 mm (3.94 × 3.08 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 624 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 111 curve and line segments |
Measured from the file. PNG: 2,000 × 1,583 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.78 in (25 × 20 mm) | 0.79 mm | 158 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.57 in (51 × 40 mm) | 1.6 mm | 317 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.35 in (76 × 60 mm) | 2.4 mm | 475 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.13 in (102 × 80 mm) | 3.1 mm | 634 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.7 in (152 × 119 mm) | 4.7 mm | 951 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.26 in (203 × 159 mm) | 6.3 mm | 1,268 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.4 in (305 × 239 mm) | 9.4 mm | 1,902 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More snowboard SVG files
-
Snowboarding rider with spray Solid · one piece -
Snowboarder in the air holding the board Solid · one piece -
Skier on a snowboard slope Solid · one piece -
Three snowboards standing in the snow Solid · one piece -
Snowboard planted in a snowdrift Solid · one piece -
Two crossed snowboards Solid · one piece -
Crossed skis and poles for a snowboard lodge Solid · one piece -
Crossed ski poles for a snowboard lodge Solid · one piece
← Snowboard from above All 15 snowboards Snowboarding rider with spray →