Snowboard planted in a snowdrift SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
One board standing nose up in a small drift, leaning a little, with the highback and straps of both bindings cut in and nothing else. The drift gives it a flat base to stand on.
What is in the file
| Size | 69 × 100 mm (2.7 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 489 mm at this size |
| Narrowest part | 4.6 mm at this size |
| Nodes | 89 curve and line segments |
Measured from the file. PNG: 1,396 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.69 × 1 in (17 × 25 mm) | 1.2 mm | 124 mm | 130 | Vinyl, card and thin sheet |
| 1.37 × 2 in (35 × 51 mm) | 2.3 mm | 248 mm | 35 | Vinyl, card and thin sheet |
| 2.06 × 3 in (52 × 76 mm) | 3.5 mm | 373 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.74 × 4 in (70 × 102 mm) | 4.7 mm | 497 mm | 8 | Any material, including 3 mm wood and acrylic |
| 4.12 × 6 in (105 × 152 mm) | 7 mm | 745 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.49 × 8 in (139 × 203 mm) | 9.3 mm | 994 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.23 × 12 in (209 × 305 mm) | 14 mm | 1,490 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More snowboard SVG files
-
Two crossed snowboards Solid · one piece -
Crossed skis and poles for a snowboard lodge Solid · one piece -
Crossed ski poles for a snowboard lodge Solid · one piece -
Snowboard goggles with a mountain view Solid · one piece -
Snowboarder in a mountain ring Solid · one piece -
Snowboard name sign Solid · one piece -
Snowboard outline Outline · one piece -
Layered snowboard in four colours Layered · 14 pieces
← Three snowboards standing in the snow All 15 snowboards Two crossed snowboards →