Snowboard name sign SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A board laid on its side with a blank deck between two cut lines and a six-armed snowflake mark at each end. The middle is clear for a name, a date or the name of a chalet.
What is in the file
| Size | 100 × 27 mm (3.94 × 1.06 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 436 mm at this size |
| Narrowest part | 3.5 mm at this size |
| Nodes | 66 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 596 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.27 in (25 × 7 mm) | 0.89 mm | 111 mm | 250 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.54 in (51 × 14 mm) | 1.8 mm | 221 mm | 80 | Vinyl, card and thin sheet |
| 3 × 0.81 in (76 × 21 mm) | 2.7 mm | 332 mm | 36 | Vinyl, card and thin sheet |
| 4 × 1.08 in (102 × 27 mm) | 3.6 mm | 443 mm | 18 | Any material, including 3 mm wood and acrylic |
| 6 × 1.62 in (152 × 41 mm) | 5.3 mm | 664 mm | 6 | Any material, including 3 mm wood and acrylic |
| 8 × 2.16 in (203 × 55 mm) | 7.1 mm | 886 mm | 5 | Any material, including 3 mm wood and acrylic |
| 12 × 3.24 in (305 × 82 mm) | 11 mm | 1,329 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More snowboard SVG files
-
Snowboard outline Outline · one piece -
Layered snowboard in four colours Layered · 14 pieces -
Snowboard from above Solid · one piece -
Snowboarder silhouette on a slope Solid · one piece -
Snowboarding rider with spray Solid · one piece -
Snowboarder in the air holding the board Solid · one piece -
Skier on a snowboard slope Solid · one piece -
Three snowboards standing in the snow Solid · one piece
← Snowboarder in a mountain ring All 15 snowboards Snowboard outline →