Snowboard from above SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A twin-tip snowboard stood on end: round nose and tail, a narrow waist, two bindings set at a duck-foot angle with a highback and two straps each, and a pair of chevrons at both ends.
What is in the file
| Size | 26 × 100 mm (1.02 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 532 mm at this size |
| Narrowest part | 4.2 mm at this size |
| Nodes | 109 curve and line segments |
Measured from the file. PNG: 577 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.26 × 1 in (7 × 25 mm) | 1.1 mm | 135 mm | 260 | Vinyl, card and thin sheet |
| 0.52 × 2 in (13 × 51 mm) | 2.1 mm | 270 mm | 80 | Vinyl, card and thin sheet |
| 0.78 × 3 in (20 × 76 mm) | 3.2 mm | 405 mm | 36 | Any material, including 3 mm wood and acrylic |
| 1.04 × 4 in (26 × 102 mm) | 4.3 mm | 541 mm | 18 | Any material, including 3 mm wood and acrylic |
| 1.56 × 6 in (40 × 152 mm) | 6.4 mm | 811 mm | 6 | Any material, including 3 mm wood and acrylic |
| 2.08 × 8 in (53 × 203 mm) | 8.5 mm | 1,081 mm | 5 | Any material, including 3 mm wood and acrylic |
| 3.12 × 12 in (79 × 305 mm) | 13 mm | 1,622 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More snowboard SVG files
-
Snowboarder silhouette on a slope Solid · one piece -
Snowboarding rider with spray Solid · one piece -
Snowboarder in the air holding the board Solid · one piece -
Skier on a snowboard slope Solid · one piece -
Three snowboards standing in the snow Solid · one piece -
Snowboard planted in a snowdrift Solid · one piece -
Two crossed snowboards Solid · one piece -
Crossed skis and poles for a snowboard lodge Solid · one piece
← Layered snowboard in four colours All 15 snowboards Snowboarder silhouette on a slope →