Free snowboard SVG

Snowboarder in the air holding the board SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Snowboarder in the air holding the board, as a solid black shape
Snowboarder in the air holding the board. The preview is the SVG file itself.

A rider in mid jump with knees tucked up, the front hand holding the nose of the board and the other arm thrown back. One piece with no ground, to fly above a layer of mountains.

What is in the file

Size100 × 88 mm (3.94 × 3.45 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length662 mm at this size
Narrowest part1.1 mm at this size
Nodes141 curve and line segments

Measured from the file. PNG: 2,000 × 1,762 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.88 in (25 × 22 mm)0.28 mm168 mm110Too fine for most machines
2 × 1.75 in (51 × 45 mm)0.56 mm336 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.63 in (76 × 67 mm)0.84 mm504 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.5 in (102 × 89 mm)1.1 mm673 mm6Vinyl, card and thin sheet
6 × 5.26 in (152 × 134 mm)1.7 mm1,009 mm2Vinyl, card and thin sheet
8 × 7.01 in (203 × 178 mm)2.2 mm1,345 mm1Vinyl, card and thin sheet
12 × 10.51 in (305 × 267 mm)3.4 mm2,018 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowboard SVG files

← Snowboarding rider with spray All 15 snowboards Skier on a snowboard slope →