Snowboard goggles with a mountain view SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A pair of snow goggles with a wide single lens, a strap end each side and two glints of light. Three peaks stand along the bottom of the lens as the view reflected in it.
What is in the file
| Size | 100 × 37 mm (3.94 × 1.45 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 579 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 93 curve and line segments |
Measured from the file. PNG: 2,000 × 785 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.37 in (25 × 9 mm) | 0.51 mm | 147 mm | 210 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.74 in (51 × 19 mm) | 1 mm | 294 mm | 65 | Vinyl, card and thin sheet |
| 3 × 1.1 in (76 × 28 mm) | 1.5 mm | 441 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.47 in (102 × 37 mm) | 2 mm | 588 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.21 in (152 × 56 mm) | 3 mm | 882 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.94 in (203 × 75 mm) | 4.1 mm | 1,177 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.42 in (305 × 112 mm) | 6.1 mm | 1,765 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More snowboard SVG files
-
Snowboarder in a mountain ring Solid · one piece -
Snowboard name sign Solid · one piece -
Snowboard outline Outline · one piece -
Layered snowboard in four colours Layered · 14 pieces -
Snowboard from above Solid · one piece -
Snowboarder silhouette on a slope Solid · one piece -
Snowboarding rider with spray Solid · one piece -
Snowboarder in the air holding the board Solid · one piece
← Crossed ski poles for a snowboard lodge All 15 snowboards Snowboarder in a mountain ring →