Layered snowboard in four colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Five layers in four colours to stack: a dark edge, a teal deck, yellow slanted stripes at the nose and tail, dark binding plates and pale straps with their highbacks.
What is in the file
| Size | 28 × 100 mm (1.09 × 3.94 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 14 outlines |
| Cut length | 1,014 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 131 curve and line segments |
| Layers | 5: edge, deck, stripes, bindings and straps |
Measured from the file. PNG: 612 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.28 × 1 in (7 × 25 mm) | Over 1.5 mm | 258 mm | 250 | Vinyl, card and thin sheet |
| 0.56 × 2 in (14 × 51 mm) | Over 3 mm | 515 mm | 80 | Any material, including 3 mm wood and acrylic |
| 0.83 × 3 in (21 × 76 mm) | Over 4.6 mm | 773 mm | 33 | Any material, including 3 mm wood and acrylic |
| 1.11 × 4 in (28 × 102 mm) | Over 6.1 mm | 1,030 mm | 18 | Any material, including 3 mm wood and acrylic |
| 1.67 × 6 in (42 × 152 mm) | Over 9.1 mm | 1,545 mm | 6 | Any material, including 3 mm wood and acrylic |
| 2.22 × 8 in (56 × 203 mm) | Over 12 mm | 2,060 mm | 5 | Any material, including 3 mm wood and acrylic |
| 3.34 × 12 in (85 × 305 mm) | Over 18 mm | 3,091 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More snowboard SVG files
-
Snowboard from above Solid · one piece -
Snowboarder silhouette on a slope Solid · one piece -
Snowboarding rider with spray Solid · one piece -
Snowboarder in the air holding the board Solid · one piece -
Skier on a snowboard slope Solid · one piece -
Three snowboards standing in the snow Solid · one piece -
Snowboard planted in a snowdrift Solid · one piece -
Two crossed snowboards Solid · one piece
← Snowboard outline All 15 snowboards Snowboard from above →