Free snowboard SVG

Two crossed snowboards SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Two crossed snowboards, as a solid black shape
Two crossed snowboards. The preview is the SVG file itself.

Two boards crossed at the waist, one with chevrons and one with a dot at each end, both with their bindings. A clear line parts them where they cross, with a bridge left so they stay one piece.

What is in the file

Size65 × 100 mm (2.55 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length939 mm at this size
Narrowest part1 mm at this size
Nodes204 curve and line segments

Measured from the file. PNG: 1,323 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.65 × 1 in (16 × 25 mm)0.25 mm239 mm140Too fine for most machines
1.3 × 2 in (33 × 51 mm)0.51 mm477 mm40Fine detail: vinyl and paper only, weed with care
1.94 × 3 in (49 × 76 mm)0.76 mm716 mm15Fine detail: vinyl and paper only, weed with care
2.59 × 4 in (66 × 102 mm)1 mm954 mm8Vinyl, card and thin sheet
3.89 × 6 in (99 × 152 mm)1.5 mm1,431 mm2Vinyl, card and thin sheet
5.18 × 8 in (132 × 203 mm)2 mm1,908 mm2Vinyl, card and thin sheet
7.78 × 12 in (198 × 305 mm)3 mm2,862 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowboard SVG files

← Snowboard planted in a snowdrift All 15 snowboards Crossed skis and poles for a snowboard lodge →