Free Santa hat SVG

Santa hat with a long tail SVG

Santa hat with a long tail, as a solid black shape — Santa hat with a long tail. The preview is the SVG file itself.

A hat whose tail swings out to the right and hangs down past the brim, ending in a fluffy pompom. Good on the corner of a sign or a photo frame.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 99 mm (3.94 × 3.89 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	604 mm at this size
Narrowest part	4.5 mm at this size
Nodes	74 curve and line segments

Measured from the file. PNG: 2,000 × 1,977 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.99 in (25 × 25 mm)	1.1 mm	153 mm	100	Vinyl, card and thin sheet
2 × 1.98 in (51 × 50 mm)	2.3 mm	307 mm	25	Vinyl, card and thin sheet
3 × 2.96 in (76 × 75 mm)	3.4 mm	460 mm	9	Any material, including 3 mm wood and acrylic
4 × 3.95 in (102 × 100 mm)	4.6 mm	614 mm	4	Any material, including 3 mm wood and acrylic
6 × 5.93 in (152 × 151 mm)	6.9 mm	920 mm	1	Any material, including 3 mm wood and acrylic
8 × 7.9 in (203 × 201 mm)	9.1 mm	1,227 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.86 in (305 × 301 mm)	14 mm	1,841 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa hat SVG files

← Simple Santa hat All 12 Santa hats Christmas hat from the front →