Free Santa hat SVG

Simple Santa hat outline SVG

Simple Santa hat outline, drawn as a line — Simple Santa hat outline. The preview is the SVG file itself.

The short hat with the smooth brim as three plain lines: cone, brim and ball. Quick to draw with a pen and easy to colour in.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 83 mm (3.94 × 3.27 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	920 mm at this size
Narrowest part	1.9 mm at this size
Nodes	86 curve and line segments

Measured from the file. PNG: 2,000 × 1,675 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.83 in (25 × 21 mm)	0.48 mm	234 mm	110	Too fine for most machines
2 × 1.66 in (51 × 42 mm)	0.97 mm	467 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.49 in (76 × 63 mm)	1.4 mm	701 mm	12	Vinyl, card and thin sheet
4 × 3.32 in (102 × 84 mm)	1.9 mm	935 mm	6	Vinyl, card and thin sheet
6 × 4.99 in (152 × 127 mm)	2.9 mm	1,402 mm	2	Vinyl, card and thin sheet
8 × 6.65 in (203 × 169 mm)	3.9 mm	1,869 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.97 in (305 × 253 mm)	5.8 mm	2,804 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa hat SVG files

← Santa hat outline All 12 Santa hats Santa hat in three pieces →