Free Santa hat SVG

Simple Santa hat SVG

Simple Santa hat, as a solid black shape — Simple Santa hat. The preview is the SVG file itself.

A short, round hat with a smooth brim and a plain ball for a pompom, flopping to the left. No fine detail, so it cuts cleanly at small sizes.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 83 mm (3.94 × 3.27 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	382 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	29 curve and line segments

Measured from the file. PNG: 2,000 × 1,675 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.83 in (25 × 21 mm)	Over 1.5 mm	97 mm	110	Vinyl, card and thin sheet
2 × 1.66 in (51 × 42 mm)	Over 3 mm	194 mm	30	Any material, including 3 mm wood and acrylic
3 × 2.49 in (76 × 63 mm)	Over 4.6 mm	291 mm	12	Any material, including 3 mm wood and acrylic
4 × 3.32 in (102 × 84 mm)	Over 6.1 mm	388 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.99 in (152 × 127 mm)	Over 9.1 mm	582 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.65 in (203 × 169 mm)	Over 12 mm	776 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.97 in (305 × 253 mm)	Over 18 mm	1,164 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa hat SVG files

← Classic Santa hat All 12 Santa hats Santa hat with a long tail →