Free Santa hat SVG

Santa hat outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa hat outline, drawn as a line
Santa hat outline. The preview is the SVG file itself.

The classic hat as a line drawing: the outer edge, the line of the brim and the ring of the pompom. For colouring sheets, foil and pen plotting.

What is in the file

Size100 × 93 mm (3.94 × 3.65 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length1,005 mm at this size
Narrowest part2.2 mm at this size
Nodes204 curve and line segments

Measured from the file. PNG: 2,000 × 1,858 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)0.56 mm255 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.85 in (51 × 47 mm)1.1 mm511 mm25Vinyl, card and thin sheet
3 × 2.78 in (76 × 71 mm)1.7 mm766 mm12Vinyl, card and thin sheet
4 × 3.7 in (102 × 94 mm)2.2 mm1,021 mm6Vinyl, card and thin sheet
6 × 5.56 in (152 × 141 mm)3.4 mm1,532 mm2Any material, including 3 mm wood and acrylic
8 × 7.41 in (203 × 188 mm)4.5 mm2,042 mm1Any material, including 3 mm wood and acrylic
12 × 11.11 in (305 × 282 mm)6.7 mm3,063 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa hat SVG files

← Christmas hat from the front All 12 Santa hats Simple Santa hat outline →