Free Santa hat SVG

Tilted Santa hat for a letter SVG

Tilted Santa hat for a letter, as a solid black shape — Tilted Santa hat for a letter. The preview is the SVG file itself.

The classic hat tipped at an angle, ready to hang on the corner of a letter, a monogram or a photo. Line the brim up with the top corner of your initial.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	77 × 100 mm (3.04 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	522 mm at this size
Narrowest part	4 mm at this size
Nodes	77 curve and line segments

Measured from the file. PNG: 1,560 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.77 × 1 in (20 × 25 mm)	1 mm	133 mm	120	Vinyl, card and thin sheet
1.54 × 2 in (39 × 51 mm)	2 mm	265 mm	35	Vinyl, card and thin sheet
2.31 × 3 in (59 × 76 mm)	3 mm	398 mm	12	Any material, including 3 mm wood and acrylic
3.08 × 4 in (78 × 102 mm)	4.1 mm	530 mm	6	Any material, including 3 mm wood and acrylic
4.63 × 6 in (118 × 152 mm)	6.1 mm	796 mm	2	Any material, including 3 mm wood and acrylic
6.17 × 8 in (157 × 203 mm)	8.1 mm	1,061 mm	1	Any material, including 3 mm wood and acrylic
9.25 × 12 in (235 × 305 mm)	12 mm	1,591 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa hat SVG files

← Santa hat with holly All 12 Santa hats Santa hat and beard →